I'm Eric Thurn, and this is the Architect.When setting out to design my balisong, I knew I wanted to create something that had never been done before. The Architect, visually, is a combination of several things I love - balisongs, Bauhaus, and my Rotring 600 mechanical pencil. The latter being an especially major influence in the aesthetics of the balisong, being based on the black-red and silver-red colourways the pencil typically comes in.

The Architect embodies the form-follows-function philosophy of the Bauhaus style. No unnecessary embellishments, every detail intentional. Every part of the balisong is designed for a practical function - with both the handles and blade featuring measurement scales, as well as a fully functional compass mode for drawing perfect circles.

The Architect is both a flipper and an EDC tool, and my attempt at creating the balisong equivalent of a swiss army knife for architects, engineers and balisong enthusiasts alike.

Architect feature breakdown:
- Functional laser-engraved measurement scales: continuous scale spanning across the left and right handles (inches one side, centimetres other side), & centimetre + millimetre scales on both sides of blade.
- Functional compass mode: handles designed with 7 mm holes to fit a standard pencil, with the other handle used for screwing in a pointy tip to affix balisong to paper. A blade slider is attached to the blade to block handles to ensure a constant radius, and small slots inside handles allow for an insert to block pencil at desired point allowing any length of pencil to be used (see 3D model).
- Balance adjustment system: The 7 mm holes, when not in use for compass mode, double as screw holes for weight screws.

Architect technical specification:
- Dual-tone 7075 aluminium handles (teflon coating on GREY, bead-blasting on SILVER)
- Black teflon-coated 440c stainless steel blade
- Laser-engraved scales
- Zen pin design
- Bushings pivot
- Speed channel construction
- Ridged texturing on handles
- Blade gap for zippy-style weight inserts

Accessories specification:
- Blade slider: aluminium body, rubber lining
- Pointy tip: stainless steel

"The Bee" is a project designed by me and my sister Weronika, for the createwithnabalis contest, which was meant to be a challenge to put our creativity to the test by trying to incorporate the characteristic features of a bee and transforming them into a balisong.

 "The Bee", true to its name, is a balisong inspired by the elegance and form of a bee. The blade design draws inspiration from the intricate shape of bee wings, carefully refined to preserve the proportions of a functional knife blade. Our project (despite not being depicted in the image), thanks to its unique design featuring numerous holes, allows the possibility of adding blade inserts, offering users the ability to personalize the balance to better suit their preferences. The front of the handles features an exceptional grip, enhanced by full-surface hexagonal texture cutouts that mimic the structure of honeycombs, with strategically placed holes for weight reduction. On the sides, we have incorporated deep, aggressive jimping and two cutouts, designed to further improve the overall grip and handling of the balisong. The gradient finish on the 7075 aluminum handles adds a unique and elegant touch to the knife's appearance.

Handle Design: Channel
Handle Material: 7075 Aluminum
Handle Finish: Bead-blasted Anodization
Blade Material: 440C Stainless Steel
Blade Finish: Bead Blasted/Black Oxide Coating
Blade Edge: Dull
Pin Design: Zen Pins
Pivot Design: Bushings Pivot
Screw: T10
Latch Design: Latchless

The "Bobasong V2," (or "Boba" for short) designed by Disuko with Milky Labs, aims to provide a cute, friendly, and pastel approach to balisongs. It is inspired by boba tea and is very bubbly! It is designed to fit right in at home with Nabalis' other whimsical designs, like the Cheese.

One thing I wanted to highlight with the Bobasong is customization and individuality. While the design fits within my personal aesthetic, the G10 scales can be dyed, many teflon coating colors are offered, and the weights can easily be swapped out to different balance profiles. My favorite part about the balisong hobby is the diversity in both flippers and their knives, and I hope everyone enjoys the ways the Bobasong shows that!

Ideal Production Measurements
Lightweight: 3.6oz
Small form factor: ~10in open ~5in closed
T10 Screws

Sandwich Handles
Teflon Coated
7075 Aluminum Liners
Dyed G10 Scale overlays
Hidden Zen Pins
3 Adjustable Balance Profiles with the "Bubble" System
Rounded edges for comfortable flipping
Jimping
Bushing pivots

Trainer Blade
440C Steel
Teflon coating
Fully crowned edges
Bite Handle Indicator
Insert cutouts
Slight tip weight for flowy flipping experience
Engraved Milky logo

Standout Features
Unique Kawaii Aesthetic
Unique Splatter Teflon Coating
Consistent yet varied collection of Milk Tea inspired colorways
Strawberry
Matcha
Taro
Brown Sugar
Parametric CAD file for easy adjustments to reach target production weight / balance / length
I put my entire sense of self into this balisong design following a truly horrific demonic sacrifice
Moddable colors with G10 scales

The Crescent started when I saw the Create With Nabalis competition post. After that, I jumped into designing the handles and the trainer blade. The Crescent represents my design philosophy, which is minimal but pleasing to the eye, with straight lines and a simple hole pattern. The problem was I didn’t know how to create a 3D model, so I decided to team up with @jappiebalisong to model and bring the idea to life. The balisong went through many revisions over a week, with many hours spent on redesigning, hearing out feedback, and rendering. It honestly was a thrill to work with @jappiebalisong and submit for this competition.

Open length: 9,71 inch | 246,8mm
Closed length: 5,63 inch | 143,1mm
Weight: ~3.3 oz | ~95 grams
Black T10 Hardware.
Balance: Neutral to slight handle bias. (Depending on the weights configuration)

-Trainer blade:
 Blade material: 440c steel
Blade finish:
Polished Pivot system:
Bushings Crowned edges
Bite handle indicator
Cutouts that focus on tip weight.

 -Handles:
Handle materials. G10, 7075 aluminum
Handle finish: Polished anodization
Handle construction: G10 scales with chanwich 7075 aluminum liners
Hidden zen pins
Jimping both milled on liners and scales
Slight taper for a better flipping experience

Colorways:
Polished silver liners/blade with white G10
Black oxide coating liners/blade with red G10

My name is Aaron, and the "Endless" is a balisong I designed inspired by the weapons and armor of Infinity Blade. Infinity Blade is a game that existed on IOS from 2010–2018, but the community around it remains dedicated, if small. I saw this competition as an opportunity to bring one of my favourite games into the public eye and give back to the community. I want this balisong to have a light handle bias, with blade weight focused towards the tip. The handles are narrow, and the faces are rounded for comfort. Lastly, it of course runs on well tuned Nabalis bushings.

The Flare is a modern balisong where bold design meets flawless balance. Born from a passion for flipping, every angle and cut reflects speed, control, and style. With its vibrant, sporty aesthetic and meticulously crafted form, it's more than a tool — it's a statement in motion.

The Flare didn't just come from a sketchpad — it became a reflection of my own attitude towards flipping. As a flipper myself, I've always seen balisong not just as a hobby, but as a form of sport and choreography. It's movement, rhythm, and precision — and I wanted The Flare to reflect that. That's why its design is fast, athletic, and full of contrast — as a sport uniform or inventory.

But beyond its sporty roots, The Flare also breaks away from traditional balisong design language. I wanted it to feel modern — clean, deliberate, and distinct. The colored frame, partial blade accents, and bold contrast details are not often seen in the balisong space. These elements give it a crisp, contemporary look that sets it apart — not just as a tool for flipping, but as a design object in its own right.

The design is based on a frame made of a single piece of aluminum. The overlays are attached to it at the top and bottom, also made of aluminum. The frame is covered with Teflon. The overlays are treated with bead blast and anodized in black. The blade is made of steel also treated with bead blast and partially covered with black oxidation, partially with Teflon in the color of the handle. In the axial unit there are bushings and zen pins hidden under the overlays. The screws are also covered with Teflon. The classic center of mass is just below the pivot point on the handle.

NYX – The Goddess of Night
In the vast universe, Nyx, the Goddess of Night, creates the dreamlike sky with her mysterious presence. Inspired by her, we created the "NYX" butterfly knife—a stunning blade for those who appreciate beauty and smooth handling.

Design Inspiration
The NYX knife is inspired by Nyx’s mysterious essence. Made from high-quality aluminum alloy, the blade has a black finish that gleams like the night sky, shimmering with hints of starlight. The handle is designed for comfort and ease, providing a smooth, ergonomic grip.

A Dream in the Dark
The NYX knife is more than just a tool—it’s a symbol of courage, beauty, and the pursuit of the unknown. Every flick of the blade challenges your limits, representing freedom and self-expression. Choosing the NYX means embracing a journey with the Goddess of Night. Let this blade be your symbol of adventure, lighting up the darkness in the name of Nyx.

Handle Inlay Material: Available with G10 or PEI inlay.
Open Length: 254.58mm
Closed Length: 144.95mm
Handle Length: 142mm
Blade Length: 125.75mm
Handle Width: 10.5-14mm
Handle Thickness: 12.92mm

A balisong companion for everyday intergalactic travels.

This design was an imaginary project about designing a balisong for astronauts. Physics always amazed me and drives my attention to skill sports. Slingshots, balisongs, unicycles, are my favorites. I travel a lot and that comes with a lot of hassle and waiting for long times. The idea of the Shuttle balisong was born on a railway station, when I was reaching out to flip to pass time. Despite having a hard time in the late night wait, flipping gave me the chance to leave the struggle behind and found myself in a better space. The CWN24 Overlord was in my hands and suddenly the connection was made and the idea of the Shuttle was born.

Check more about specs in the "IDEAL SPECIFICATIONS" section.

Overall length 240mm / 9.5"
Thickness 13mm / 0.51”
Weight 98g / 3.5oz
Handle length 130mm / 5.1"
Blade length 105mm / 4,1"
Closed length 140mm / 5.5"
Neutral center 32,5mm / 1.3"
Blade
Teflon coated, 440C, bite indicator, 3 axis CNC. Bushings.
Handle
Anodized aluminum 7075 Liners, identical cuts.
G10 Sheets with bite handle mark, base cut is identical, mirrored parts.
Bubble Weight System - Bias tuning.
Aluminum spacers at jimping.
Hidden Zen pins.
Teflon coated T10 hardware.

The Teflon coatings were obviously in play and added to the space look and feel. Also using lightly colored G10 had a good sensory feel and a great match. To emphasize the functional aesthetic I was planning to use stronger visuals for the aluminum liners and underlined the structural importance with allowing to be seen a bit better even in the cutouts.

Having a wider blade was a point on making it more device like, but weight balance gave me a headache. I was working on projects earlier where studied crystals and collected meteorite textures. The strength of internal lines was catching my eyes. Since CNC can be tasking cost wise I was simplified the patterns to horizontal and angled lines layered in 3 depths. This was used a lot in the bicycle industry when custom CNC parts started to show up in earlier days. Keeping weight under control and still allow to tweak for the looks. In the final touches of design I was inspired of electric circuits as well.

The jimping is mostly usual, the difference is with the spacer where an additional set of inbetween jimping is added to add sideways stability by exposing the edge of the liners. Pins are used to position them, one sided CNC work and no mirror parts needed.

The bite handle indicator had different variations and the closed bali also shows the blade tip in its strong angle, but wanted to add more feedback. The recess around the screw adds a subtle visual element, and easy to feel with the fingertips, even in a case or pocket.

The practical bushing of Nabalis plus the Bubble Weight System were obvious go to solutions. It is really convenient to use this hardware and adds a to the overall flipping experience.

A beautiful unison, the Treble is the meticulously crafted love child of two of my biggest hobbies: knives and music. When the base idea was brought up with the help of some wonderful people in the BladeBias Discord server way back in September of 2024, I knew I needed to fully design a balisong. Behind this design is 8 years of trumpet playing, 4 years of knife collecting, and the passion of making a dream come true.

In a hobby dominated with sharp angles and sleek lines, the Treble is a refreshing contrast. The Treble embodies both the graceful elegance of flipping and the beauty of song. However, it’s not here just for looks. Heavily rounded handles ensure seamless transitions between tricks and comfortable rollovers, while surface texturing, speed channels, and tall jimping work in harmony to guarantee that the knife does as you wish. The simple handle construction allows for lower production costs, while blade inserts provide the much needed balance customization to make the knife truly yours. It is my hope that the files for the inserts would be accessible to everyone, allowing for complete customization, cheap replacements, and infinite possibilities of materials.

440C Stainless steel blade for increased strength
7075 Aluminum handles for desired weight distribution
Aluminum or Translucent plastic blade inserts
Polished anodization for grip and aesthetics
Blade Length (tip to nip): 13.2cm (5.2in)
Handle Length: 14.5cm (5.7in)
Closed Length: 14.9cm (5.9in)
Open Length: 26.3cm (10.3in)
Ideally, the Treble would ring like a morning songbird at the pitch of a standard tuning A (440hz)

Introducing the Wave. This trainer has a unique blade design that doubles as a bottle opener. It's also customizable, with swappable inlays and adjustable weights for any flipping style. The tapered handles and textured surface ensures the trainer stays securely in your hand, while the distinctive bubbles on the sides adds a touch of style and grip for all your tricks. The inspiration for the trainer came from the fluidity and movement of the ocean. The name reflects the origins of the design and the joy I felt while sailing the high seas in a pirate game I would play with my friends. Whether you're just starting out or you're an experienced veteran, this trainer will help you make waves with every flip.

Handle Specs
-7075 Al
-Bead blasted
-Handle length: 5.45-5.55"
-Handle thickness: 0.5"
-Compound rounded handles as on all my designs. ( The amount of curvature is inversely proportional to the width of the handle.)
*May change to be the opposite if it handles better during flipping*
-Swappable "wave" inserts to better customize the trainer such as different standard colors or special emissive (glow) materials
-Removable weights at the bottom for various balance points. Made from G10, Aluminum, and Brass

Trainer Blades Specs
-440c Blade material
-Bead blasted OR Black Oxide finish (full black knife w/white inserts🤔)
-0.14" thickness - ~5" blade length (pivot to tip)
-Bushings
-Bottle opener

Overall Weight: 3.65oz-4oz is ideal